Pay in installments of $5.61 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Nov 15 - Nov 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron atabapoense kaufen Philodendron atabapoense – Foliage FactoryPhilodendron atabapoense Philodendron atabapoense is a Venezuelan climbing species with long, tapering leaves, dark green upper surfaces and wine toned detail on the petioles, cataphylls and parts of the venation. The mature blade is broadest near the lower part of the leaf, then narrows toward an elongated tip. Mature foliage can become large, thin textured and slightly undulate at the margin. The combination of long blade shape, dark green upper
Philodendron atabapoense
Philodendron atabapoense is a Venezuelan climbing species with long, tapering leaves, dark green upper surfaces and wine-toned detail on the petioles, cataphylls and parts of the venation. The mature blade is broadest near the lower part of the leaf, then narrows toward an elongated tip.
Mature foliage can become large, thin-textured and slightly undulate at the margin. The combination of long blade shape, dark green upper surfaces and reddish wine detail gives supported growth a lean, strongly vertical appearance.
Philodendron atabapoense foliage details
- Leaf shape: Long, triangular-ovate blades that broaden near the base and taper toward the tip.
- Colour detail: Dark green upper surfaces with wine-coloured spotting or tones on petioles, cataphylls and parts of the venation.
- Native range: Native to Venezuela’s Amazonas region.
- Growth habit: Climbing wet-forest species that can be trained on a pole or plank indoors.
Philodendron atabapoense origin and mature leaf form
Philodendron atabapoense was published by G.S. Bunting in 1975 and grows as a climber in wet tropical forest.
Mature blades can be firm but thin, broad near the lower blade, concave along parts of the margin and marked by several strong veins from the base. Give the leaves enough vertical space so they can hang without folding or pressing against surrounding objects.
Philodendron atabapoense care for long tapering leaves
- Support: Train the stem upward before it stretches sideways. Attached aerial roots help the plant carry longer leaves.
- Humidity: Aim for moderate to high humidity during active growth so new leaves expand without sticking or creasing.
- Light: Bright, indirect light suits the thin, tapering leaves. Harsh midday sun can scorch exposed surfaces, especially on fresh growth.
- Watering: Let the top 20–30% of the pot dry, then water thoroughly. Avoid keeping the lower pot wet for days.
- Substrate: Use an airy aroid mix with bark and mineral drainage. Fine, compact soil increases the risk of yellowing and root stress.
- Feeding: Feed lightly during the growing season. Large-leaved climbers respond better to steady nutrition than heavy, irregular doses.
Philodendron atabapoense leaf and root issues
- Soft yellow leaves: Check whether the mix is staying wet too long. Improve drainage and let the pot dry further before watering again.
- Shorter new leaves: Usually caused by weak light, no climbing surface, or interrupted root growth. Adjust support and light first.
- Brown patches: Look for direct sun exposure, dry root episodes, or leaves touching hot glass or a grow light.
- Stuck leaf tips: Increase humidity around active new growth and avoid moving the plant while a leaf is unfurling.
Philodendron atabapoense is toxic if ingested and can irritate the mouth and digestive tract. Keep it away from pets and wash your hands after pruning or taking cuttings.
Philodendron atabapoense etymology and description history
The genus name Philodendron comes from Greek roots meaning “tree-loving”. Philodendron atabapoense was described by G.S. Bunting in Acta Botanica Venezuelica in 1975 and is native to Venezuela’s Amazonas region.
Add Philodendron atabapoense to your order if you want a climbing Philodendron with long, dark green leaves and wine-toned petiole and vein detail.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Has worked for me
Number of Items: 1, Style: X10 Pro Omni Accessories Kit
All the parts fit my Eufy vacuum/mop perfectly
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
★★★★★ 5
Amazing deal on everything you need to keep your Omni C20 going for years
First and foremost, when I opened the package all the side brushes were all bent up crazy and all over the place (appearing to be ruined) but there was a little business card tucked away in the bag (I included a picture) that tells you to put them into 80 degree Celsius water (which is 176 degrees Fahrenheit BTW) and that they would straight and I have to admit I was skeptical... until about 5 minutes ago.
WOW - I mean WOW - they straightened right up like it was poetry in motion, very cool to see it work - in my case I dipped the ends in individually 1 by 1 with all 6 of them and they're good to go now.
Tested the pads for size and fit as well as the rollers, filters and bags the other day and they were all perfect matches as well.
They also packed it extremely efficiently in a nice bag which is very reusable for long term storage.
Also included is a detangle cutter if you have people with long hair in the house - and a brush for filter and roller cleaning if needed.
It's such an incredible set that LITERALLY every single Omni C20 should buy. It's a no brainer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
Replacement Kit for Eufy C20 Omni
I got this 28-piece accessory kit for my robot vacuum, and it is a great value for the price. It contains everything you need for several rounds of maintenance, including main brushes, filters, side brushes, mop pads, and dust bags. It even comes with a small cleaning tool and a screwdriver to help with the installation.
Everything in the pack fits the C20 Omni perfectly and works just as well as the original parts. The mop pads are absorbent and easy to wash in the machine, and the brushes do a good job of picking up dust and hair. It’s much cheaper than buying brand-name replacements and makes it easy to keep the robot running at peak performance.
Overall, it is a functional and complete product that does exactly what it is supposed to do. It is a simple and cost-effective way to stock up on all the replacement parts you'll need for several months.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 5
Roborock S7 MaxV keeps my laminate floors dust free.
Although the Roborock S7 MaxV is not light on the wallet it has proven thus far to have been well worth the money spent. I did several weeks worth of research before buying this robotic vacuum cleaner. I chose not to buy the new S8 because I have all laminate flooring, no carpet anywhere and the S7 single roller seemed the logical choice. I ended up getting the black S7 MaxV and the white Auto-Empty charging dock separately because it was cheaper and there did not seem to be anyplace selling both the units in black.
=== THE VACUUM CLEANING UNIT ===
* The initial rapid (no vacuuming option) LIDAR MAPPING is exceptional in it's accuracy although if a room has ceiling to floor mirrors the LIDAR laser ranging will think that what's in the mirror is another room and it will show on the map on your cell phone app. Just create a "no-go" zone for that area and no problem. With each successive cleaning the machine seems to fine tune it's "understanding" of each room. However if one completely rearranges everything in a room it may take a run or two for it to fully adapt.
* The OBSTACLE AVOIDANCE artificial intelligence exceeded my expectations. That said, when I do manual vacuuming I always move things around some to get to various tight spots so I do something similar for this robotic vac before turning it loose and I'm not lugging around a manual vac while doing so. Obviously if an object is very small it will not be considered an obstacle and it will go over it and try to suck it into it's dust bin. Sometimes an A/C power cord will fall into this category and it will wrestle with it and in my experience it eventually just leaves it but I just make sure I clear such wires before sending the gizmo on it's vacuum run.
The obstacle avoidance feature has 2 settings with one being less strict than the other setting. I use it on the less strict setting so that it navigates narrow spaces more thoroughly. This can result in it bumping a door that is ajar such that it shuts itself into a room and can't get out by itself to either go on the next room to vac or to the charging dock. I just wedge rubber door stops under the ends of such doors and they stay put during operations. The MaxV variant of the S7 has the more advanced AI obstacle avoidance system and to me was worth the extra cost. The newer S8 units have similarly capable obstacle avoidance systems using just slightly different technology.
* Roborock's mapping app for the cell phone does the job and and can be updated automatically. My only very minor issue with it is that when dividing rooms or marking off "no-go" zones on my smaller Android phone it can get a bit fiddly but I think most people have iPad sized phones these days so likely won't find this an issue.
=== THE AUTO-EMPTY DOCKING UNIT ===
* The docking unit is pretty straight forward and does a stellar job of emptying 95-100% out of the vacuum's sealed on-board dust bin into the sealed bag within the sealed container on the dock. The dock has an additional HEPA filter which prevents essentially any particles from escaping into the air around it. It can be rather loud during this operation which will at most only last 30 seconds. The empty frequency can be adjusted from "Smart", "Light", "Balanced" and "Max". the "Max" runs the full 30 secs and the other 3 are pretty much left up to the AI to figure out. Not sure what the diff is between the "Smart" and "Balanced". I just use "Balanced" and if in doubt manually run it from the app which will go 30 secs. I haven't filled the bag yet because it claims to hold 1-4 months worth of dust but that depends on how many pets, kids, foot traffic and where one lives as to how much service will be had from the bag. Also with this older (released early-2022) Roborock Auto-Empty units used with the model S7 MaxV vacuum a non-bag canister can be obtained which I purchased just in case inflation (no pun) makes buying bags a "no-go" zone. I don't think Roborock is offering that option with their latest S8 units. I just swap the container holding the bag with the special container using no bag.
=== THE APP USED TO CONTROL EVERYTHING ===
* I mentioned what I deemed the most significant aspects of the app above but it has other features which can be found in the manual and on Youtube.
Bottom line is I am most pleased with my new Roborock vac. It keeps my house clean with really minimal effort. I am a bit of a technical geek (retired programmer/analyst) so maintaining the thing is more fun than a chore to me. It also made me laugh one time when I sent it on a mission to vacuum the wash room. I heard the unit's voice announce that it was leaving the dock to go clean. It rolled out into the living room where I was sitting and at first seemed to be looking around as though lost moving to and fro then after a few seconds of roving it suddenly figured out what to do and went straight through the dining are to the wash room to finish it's mission. This likely is not as amusing put into words as it was to watch.
UPDATE 05-05-2023: After more time with this Roborock S7 MaxV I felt relating some additional experiences may be useful to some. Although I have not used the vacuum's mopping feature at all because my main interest is in it's vacuuming and superior navigational capability over time I began noticing my laminate flooring suddenly looking shinier. Mind you I hadn't manually mopped in an embarrassingly long time so this vac was doing better than I with my excellent Miele canister vac which I now only use to occasionally tune up the Roborock of accumulated surface dust from it's missions. The robot vac shamed me into actually doing a proper mopping of the floor. Now it will stay that way.
The point here is that prior to using this type vacuum it is very useful to first thoroughly clean the floors (or carpets) as a baseline THEN use this spiffy device to keep it that way on a daily basis as it has for me. I'm an older widower living alone now for 8 years and I try to keep the place as clean as possible. With the S7 MaxV it's like having a service regularly vacuuming the floors. I live in the mountains and it takes no time for dust to accumulate here so again I am quite satisfied with this particular robotic vacuum.
UPDATE 06-06-2023: After a couple months of owning the Roborock S7 MaxV and it's self-empty docking station I can say that using it to clean my laminate flooring once a week is more than adequate for a single guy living in a 2050 square foot single story home. I fired if up a lot the first week or so to assess it's capabilities. It was cleaning overkill for my purposes BUT I have zero pets and just one person with no carpets. My experience might have been different had I not first baseline super cleaned the house before beginning to use this vacuum. I mention this because I watched many reviews with videos showing problems with too much pet hair or "dirt" accumulated in the vacuum's dust bin before the thing could even finish a trip around their home's flooring. I've concluded that carpets are tougher for these machines which is why I have no issues with it's performance. Also if a home has 2 adults, 3 kids, 3 dogs, a cat or two and live in the country expecting one of these things to do a perfect job might be a big ask. Particularly if one does not have regular vacuum schedule adjusted to the amount of daily/weekly accumulated dirt. I get buy once a week but a household such as the one described above might require a daily run to avoid massive dirt accumulation in the dust bin before it's finished doing it's thing.
The bottom line here is that this machine appears to be well designed both from a hardware and software standpoint but even artificial intelligence and sturdy hardware have their limitations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2023
★★★★★ 5
Fabulous robovac
Color: Black01
I bought this as a replacement for my iRobot Roomba j7+ (7550). We have been loyal iRobot fans for years but their quality lately has been subpar. The j7+ was a perfect example of it...I spent so much time messing with it getting stuck & having issues I might as well have pulled out the Kirby and just vacuumed myself. After research this machine constantly came back as highly recommended. So far, I can see why!! It does occasionally get stuck under my Island but other than that it works wonderfully and my floors are cleaner than they've been in a long time. The app features are great...I love that I can see mid function exactly where it has cleaned, it was easy to use and program. It works so fast too! The Roomba used to take 6 hours or so to do the 2200 sq feet on our first floor but this one usually does it in less than half that time. And it's soooo much quieter. I've been on Teams meetings with it in my office w/me and no one noticed. I highly recommend this unit!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026