SKU: 41764418631
saguaro palm plant

saguaro palm plant Buy Sago Palm Phoenix, AZ | Cycas revoluta

Sale price$23.08 Regular price$25.64
Save 10%

Pay in installments of $6.41 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Nov 14 - Nov 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

saguaro palm plant Buy Sago Palm Phoenix, AZ | Cycas revolutaA Prehistoric Showpiece for Phoenix Gardens Sago Palm The Sago Palm (Cycas revoluta) is one of the most striking and timeless accent plants for Phoenix landscapes. Despite its name, the Sago isnt actually a palm its a cycad, an ancient plant group that predates the dinosaurs. With stiff, glossy dark green fronds radiating in a perfect symmetrical rosette from a thick, rough textured trunk, the Sago Palm adds bold architectural drama to any setting.

A Prehistoric Showpiece for Phoenix Gardens — Sago Palm

The Sago Palm (Cycas revoluta) is one of the most striking and timeless accent plants for Phoenix landscapes. Despite its name, the Sago isn’t actually a palm — it’s a cycad, an ancient plant group that predates the dinosaurs. With stiff, glossy dark green fronds radiating in a perfect symmetrical rosette from a thick, rough-textured trunk, the Sago Palm adds bold architectural drama to any setting. Slow-growing and incredibly long-lived, Sagos thrive in the Phoenix heat with minimal water and care. Whether you’re designing a modern Scottsdale courtyard, accenting a Chandler entryway, or adding year-round texture to a Gilbert patio — the Sago Palm is a timeless, low-maintenance choice.

Sago Palm Plant Details

Attribute Detail
Scientific Name Cycas revoluta
Common Names Sago Palm, King Sago, Japanese Sago Palm
Mature Height 6–10 feet (very slow to reach full height)
Mature Width 6–8 feet (frond spread)
Growth Rate Very slow — 1–2 new frond flushes per year
Sun Full sun to partial shade. Handles reflected heat but appreciates afternoon shade in hottest months.
Water Low once established. Very drought-tolerant.
USDA Zones 8b–11 (Phoenix is Zone 9b–10a)
Soil Well-draining required. Adapts to Arizona caliche soils if drainage is adequate.
Foliage Evergreen — stiff, glossy dark green fronds year-round
Type Cycad (not a true palm)

Sago Palm Uses in Phoenix Landscapes

Modern Desert Entryways & Courtyards

Sago Palms are a designer favorite for framing front doors, flanking garage entries, and anchoring courtyard plantings in Scottsdale, Paradise Valley, and Arcadia. Their perfect symmetry and sculptural form pair beautifully with clean-lined architecture and gravel mulch. Plant a matched pair for formal balance, or use a single large specimen as a dramatic focal point.

Container & Patio Plantings

Because of their compact size and slow growth, Sago Palms are ideal for large containers on Chandler and Tempe patios, pool decks, and balconies. A 15-gallon Sago in a decorative pot adds instant tropical-modern texture to outdoor living spaces. They also work well in narrow side yards and tight planting beds where larger palms won’t fit.

Rock Garden & Desert Modern Accents

Sagos pair perfectly with desert rock mulch, agave, and other succulents for a textured, layered desert garden in Mesa, Gilbert, and Peoria. Their dark green fronds create striking contrast against lighter gravel and boulders. Group 3–5 at varying sizes for a naturalistic cycad garden effect.

Best Time to Plant Sago Palm in Phoenix

Fall (October–November) is the ideal planting window. Warm soil promotes root establishment while cooler air reduces stress. Spring (February–April) is the second-best window. Sago Palms can handle summer planting if kept consistently watered during the first few weeks, but a fall start gives the best results for long-term establishment.

How to Plant Sago Palm

  1. Dig wide, not deep — excavate 2–3x the root ball width at the same depth. Sagos have shallow root systems and must not be planted too deep.
  2. Check for caliche — good drainage is critical. Break through any hardpan layer. If drainage is poor, consider a raised bed or mound.
  3. Backfill with native soil — a light 20% sand or perlite amendment improves drainage in heavy soils.
  4. Spacing — plant 4–6 feet apart for grouped plantings; 6–8 feet from structures to allow full frond spread.
  5. Water basin — build a 3–4 inch soil ring to direct water to roots during establishment.
  6. Mulch — 2–3 inches of gravel mulch around the base. Avoid piling organic mulch against the trunk.

Watering Sago Palm in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Every 2–3 days, deep and slow
  • Months 1–2: Every 4–5 days
  • Months 3–6: Every 7–10 days
  • After Year 1: Every 10–14 days in summer; monthly in winter

Drip Irrigation

Place 1–2 emitters (1–2 GPH) 12–18 inches from the trunk. Sago Palms are very drought-tolerant once established and are easily overwatered. Let the soil dry between waterings — soggy soil causes root rot, which is the #1 killer of Sagos in Arizona.

How fast does Sago Palm grow in Phoenix?
Sago Palms are very slow growers. They produce 1–2 flushes of new fronds per year and may add only an inch or two of trunk height annually. A 5-gallon Sago will take many years to reach its mature size of 6–10 feet. For instant impact, start with a larger 15 or 25-gallon specimen.

Is Sago Palm drought tolerant?
Very much so. Established Sago Palms are among the most drought-tolerant landscape plants available. They store moisture in their thick trunks and need only deep, infrequent watering once their root systems are established.

Are Sago Palms toxic?
Yes — all parts of the Sago Palm are toxic to pets (especially dogs) and humans if ingested. The seeds are the most toxic part. If you have curious pets, consider placing Sagos in areas pets can’t access, or choose a pet-safe alternative.

Is Sago Palm actually a palm?
No. Despite its common name, the Sago Palm is a cycad — a primitive plant group that has existed for over 200 million years. Cycads are more closely related to conifers than to true palms. Their prehistoric lineage gives them a unique, sculptural appearance that true palms don’t have.

Do Sago Palms survive Phoenix freeze events?
Sago Palms are cold-hardy to about 15°F, making them very resilient during Phoenix’s rare winter freezes. They may show some frond burn after a hard frost, but the plant typically recovers fully with new growth in spring.

You May Also Like

  • Pygmy Date Palm — a compact feather palm for patios and small spaces, with soft arching fronds.
  • Mediterranean Fan Palm — a multi-trunk fan palm with a sculptural form, great for desert modern designs.
  • Pineapple Palm — a bold statement palm with a massive crown and thick textured trunk.
  • Desert Spoon — a native Arizona accent plant with blue-green rosettes and a similar architectural feel.

How Many Sago Palms Do I Need?

Sago Palm is a slow, sculptural cycad with a 6 to 8 foot frond spread, so it is set as a specimen or grouped, never run as a hedge. Use these layouts:

  • Single focal point: one large Sago in a courtyard, entry bed, or decorative pot, set 6 to 8 feet from walls so the rosette spreads symmetrically.
  • Matched pair: flank a front door or garage with two for formal balance, each 6 to 8 feet off the structure.
  • Cycad grouping: cluster 3 to 5 at varying sizes 4 to 6 feet on center for a naturalistic rock-garden effect.

The fronds are stiff and lightly spine-tipped, so keep the rosette 2 to 3 feet back from walkways and seating where people brush past.

Sago Palm Season-by-Season in Phoenix

  • Spring (Feb–Apr): the main event, a single symmetrical flush of bright new fronds rises from the crown; a strong second planting window.
  • Summer (May–Sep): tough in heat and reflected heat, though afternoon shade keeps fronds their deepest green in the worst of it. Let soil dry between deep soaks, since wet summer roots invite rot. A second light flush can follow monsoon rains.
  • Fall (Oct–Nov): the prime low-desert planting season; the glossy crown holds as growth slows.
  • Winter (Dec–Jan): evergreen and cold-hardy to about 15°F, shrugging off typical Valley freezes. A hard frost may brown some fronds, but the plant pushes fresh growth in spring.

At a Glance

✔ Heat-Loving (Reflected-Heat Tolerant)   ✔ Drought-Tolerant   ✔ Evergreen   ✔ Pool-Friendly (Low-Litter)   ✔ Low-Maintenance   ✔ Deer & Rabbit-Resistant   ✔ Cold-Hardy to 15°F

Plant It With

  • Desert Spoon: a native blue-green rosette with a matching architectural feel for a low-water accent.
  • Pygmy Date Palm: a compact feather palm that softens the Sago's stiff rosette in a grouping.
  • Mediterranean Fan Palm: a sculptural multi-trunk palm for desert-modern layering.
  • Pineapple Palm: a bold full-size crown to tower over a Sago understory.

Is Sago Palm Right for Your Yard?

Sago Palm thrives in Phoenix sun with a little afternoon shade, asks for very little water, and adds timeless architectural form to courtyards, entries, pots, and rock gardens with almost no upkeep. It is not a fit if you have curious pets or small children, or want fast results: every part of the plant is toxic if chewed or eaten, and it is one of the slowest-growing plants you can buy.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 41764418631

Discover Niche Categories That Outsell saguaro palm plant

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Danielle Chen
Phoenix, US
★★★★★ 5
Perfect Balance of Comfort, Support, and Style!
Size: 934-Z, Color: Black, Size: 934-Z, Color: Black
I’ve been using this chair for a few weeks now, and I’m genuinely impressed with how much of a difference it’s made in my workspace. The mesh back is one of my favorite features—it offers excellent breathability and prevents that sticky, overheated feeling you sometimes get with solid-back chairs, even after sitting for hours. The seat cushion is firm enough to give proper support but still has enough give to keep me comfortable through long workdays. It feels like the perfect middle ground between soft and supportive. The adjustable foot ring has been a complete game changer for me. I use a taller desk setup, and having somewhere to rest my feet makes a huge difference in posture and overall comfort. Whether I’m sitting upright for focused work or leaning back to read, it’s always at the right height. The flip-up armrests are another smart design choice. When I’m typing, I like to have them down for support, but when I’m done, I can flip them up and push the chair neatly under my desk—saving space and keeping things tidy. The casters roll smoothly on both hardwood and rugs, so I can move around easily without scraping the floor or getting stuck. The overall build quality feels solid and sturdy, with no wobbles or creaks. Assembly was surprisingly quick—everything was clearly labeled, the parts felt durable, and it only took me about 20 minutes from opening the box to sitting in the chair. The sleek, modern look is another big plus—it blends in perfectly with my home office décor without feeling bulky or taking up too much visual space. If you’re looking for a chair that combines comfort, ergonomic support, durability, and style, I can’t recommend this one enough. It’s equally great for work, studying, or just relaxing at your desk, and it’s definitely been worth every penny.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
S
Verified Purchase
sleepywan
Houston, US
★★★★★ 3
OK for the price, but overall comfort is avergae
Size: 934-Z, Color: Mustard
Easy to put together, color (mustard) accurate to images, and while I understand this is not a high-end chair, I feel like it still needs to be rated for its quality. Pros: the seat cushions are fairly comfortable and it rolls well. Adjustable footrest is easy enough and mostly sturdy. Cons: For a tall office chair, it doesn't go up high enough. I actually had to lower my standing desk to sit at it, which then isn't where I want it when I'm standing now. It's also a bit wobbly. The seat area's attachment to the post isn't as solid as it should be for a tall chair, so while sitting, it does tend to lean/slope forward and wobble side to side. The lumbar support is not adjustable, so I'm not even really sure what it does. And the armrests are not very comfortable to use. Since they are hard plastic, they are just a bit too rigid to rely on for any comfort. They are basically there to hold on to when you're getting out of the chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
M
Verified Purchase
Mel
Birmingham, US
★★★★★ 4
Good Value for a Tall Chair
Size: 934W-Z, Color: White
I have received this chair just today and would like to give my first impressions of it. Height is super adjustable as well as the foot rest. My desk is very tall (~34 inches vs standard ~29 inches) and does not suit a standard height chair. This chair's height is enough to sit comfortably at mybut also still having adjustment to be even higher. Lumbar support is a manual adjustment that can be adjusted by sliding the lumbar piece up or down and it seems it can be tiled as well. No reclining feature or slight backrest tilt adjustment. I'm used to my chairs reclining so it feels a little awkward siting in a flat base and straight backrest. I feel like I'm sitting too forward or leaning forward slightly but is probably something I can get use to. Easy to put together and feels very sturdy. Plastic parts of chair are made from a really sturdy plastic, like playhouse plastic materials. Wheels roll around carpet easily. Mesh seems to be a strong material, though the mesh feels kind itchy on bare skin. Overall, I think this is a good chair to get if you're needing a tall chair for a good value and can sacrifice no backrest tilt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
O
Verified Purchase
Orion
Battle Creek, US
★★★★★ 5
Unexpectedly great chair - easily adjusting it to suit changing day-to-day needs makes it incredible
Color: Black Rhythm
The bottom line on this chair is that it is unexpectedly miraculous. After just 3 days, I've found it is unconventionally comfortable and the thing that makes it unique is that it renders adjusting it a normal part of its usage. I was originally like most folks, I presume - set the chair and then see how it does - but this chair demands that you use its intuitive controls to change things around as your needs change during the day. It is so easy to do, and that is where the magic is. I graduated from an excellent budget chair, the Alera Elusion high-back that is very adjustable. After over 5 years of pretty heavy usage, though, it was showing its wear, and I was really starting to feel the cushion every time I sat on it. I also started to experience some neck, shoulder, and lower back discomfort, and decided it was time to graduate to a better solution. I did not consider the Embody chair initially. At first glance, it looked a bit weird, and it was also on the expensive side, so I blew right past it. My initial starting point was the Aeron. I had used one at work years ago, and I recalled its adjustability. My body was much younger when I had used it, so I didn't experience its ergonomic benefits as well as I should have. I also looked at Steelcase models as they had some good reviews. Steelcase didn't fit my requirements as well as the Herman Miller solutions, so I gravitated strongly to the Aeron and was about to push the trigger on the order. A last second search on YouTube led me to the Embody and I was intrigued because of a couple of factors: the intuitiveness of the controls and the emphasis on the flexibility of the back and seat. The people that loved it REALLY loved it, and that, compounded with the Herman Miller return policy interested me enough to try it. So, here are some findings from the past 3 days: First, the seat is incredibly comfortable. The pixellated solution flexes with the weight that is applied to it, and it makes you feel as though you are suspended with no uncomfortable pressure points - this completely resolved the issue I was facing with the old Alera. It breathes well, is cool, and just invites you to sit down. The seat length adjustment required a little strength, but works well - you are not stuck with just the default length that might be either too small or too large. I had to adjust a couple of times to get just the right length. Once set, I don't foresee having to adjust it often. Second, I have found that I change the recline setting on the chair frequently. When I am typing, I set it so that it is relatively rigid, and when I am mostly reading, I set it so that it flexes more. There are several aspects to this - for typing, I set the tilt limiter to the position that allows the least possible movement or the next step down. I tighten the recline knob to keep me more upright, and adjust the back to a comfortable setting. It is all really easy, and the chair gives immediate feedback to ensure a good setting. When I am reading, I set the recline to setting 2 or 3 (more recline) and relax the recline a bit. That gives me the opportunity to lean back as needed and move around, with full support. If I am watching YouTube, I go to the most relaxed recline setting, and adjust the back to a less aggressive setting, and it is very comfortable. Setting/resetting all of the controls is responsive, easy, and intuitive. I never thought that this would be so required in a good seating experience. Third, I fiddled with the height of the chair to find the most comfortable setting. I use an iMovR standing desk and a Kinesis Advantage keyboard. I initially set the chair/desk combination so that my feet were flat on the ground and so that my forearms were angled downward slightly - supposedly more ergonomic. I ended up with some discomfort in my right wrist. Through experimentation, I found that raising my table or lowering the chair so that my forearms are angled a bit upwards got me in the correct wrist position for the keyboard, since it has wells. I am more upright with these settings, and am finding that my back is much more in contact with the chair, providing great and flexible support. This may not work well for folks using normal keyboards, but it is great with the Advantage. I also adjusted the height of the monitor so that it is a little higher than most ergonomic folks would recommend. I had found that by keeping the top of the monitor strictly at eye level as recommended, I was moving my head down to read the lower part of the screen, and this was causing some neck discomfort. My current setting is very comfortable. I have spent long hours in this chair over the past few days, and I am very impressed. My experience with the Alera and Aeron, both excellent chairs, is that they unwittingly promote the initial set and don't adjust paradigm, simply because adjustments, though technically possible, are not as integrated into the seating experience - you have to bend, get up, or twist unnaturally to do the adjustment. The Embody chair, on the other hand, encourages adjustments while you are in the seated position because the controls are few and easy to reach. This allows adjustments that correlate to the changing needs of our bodies throughout the day with immediate feedback because all of the controls are so well placed and simple to use. Flexibility and consistent support are inherently part of the design. No doubt that this chair is expensive, but with the generous 12 year warranty, this chair is about as good an investment you can make for your back and your general health if you spend significant time in a chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2020
K
Verified Purchase
Kainoa68
Omaha, US
★★★★★ 5
The perfect office chair for me
Color: Berry Blue Balance
I’ve always wanted a good ergonomic chair for my home office but, since most of my time was spend in the office prior to COVID, I couldn’t really justify spending the money. When COVID shutdown the office and remote work meant spending 10 – 12 hours in my cheapy chair, it was time to look for the home office chair of my dreams. I really had three chairs in mind; the Herman Miller (HM) Aeron, the HM Embody and the Steelcase (SC) Gesture. Why did I settle on the HM Embody? • Seating Material – In the office, the AC is always cranked up so you don’t really get hot even when sitting for long periods of time, so breathability of the seat doesn’t seem to be as much of a problem. Normally, at home you don’t have the AC up as high so there is a higher chance that your butt and back of your thighs will get hot and sweaty. The Gesture is a more traditional office seat design with tight woven fabric on a foam cushion seating surface. You could image it getting hot. The Embody has what I would call an airframe. The seating material is a sort of open weave, porous fabric (Balance fabric) and stretched over a frame. This allows air to circulate freely through the seat. Aeron is similar but a mesh. In this area Embody was chosen because, if you are wearing shorts (no one sees below our chest on a vid call. . . right?) the mesh could be rougher on your skin and not be as comfortable. This turned out to be true. The Embody fabric was much softer to the touch, yet just as breathable as the Aeron mesh. Durability of the fabric is very good and after almost 2 years of daily use there is no signs of wear or color fading. • Ergonomic adjustments – All three chairs have similar seat adjustments with one exception. The Aero and Gesture have adjustable lumbar supports. The Embody doesn’t. It has a sort of lattice structure that has curvatures to cradle your back. You can adjust the angle of the backrest to come in closer to your back, thus giving more lumbar support (and upper back support) or away for less. How this would actually feel was a big question at time of purchase, but I can tell you that it works fine for me and provide the support I need. I also like how the backrest tapers towards the middle. This allows more freedom of movement of your arms and elbows. • Arms - The arms should be part of the ergonomics, but although the Embody has less adjustments here it still provides good ergonomic support. The arms on the Embody move up and down and narrower to wider. They don’t slide fore/aft or pivot in/away from you. The limited arm adjustments have not been a problem. I can comfortably use the armrests all day. If you want more arm adjustability, the Gesture offers more, but from my use of the chair in the office, some of it like the pivot function, just get in the way. • Seat structure – All three have solid, durable structures. I have not had any problems with the base, casters, or seat frame itself. I expect it to last a long time. Now, everybody’s body is shaped differently and that matters when choosing a chair. To my knowledge the Embody and Gesture only come in one size while the Aeron is available in three. I am assuming that the Embody is designed to fit people within a certain average height and weight range. If you fall outside of that, the comfort and fit won’t be as good. In that case, you might want to look at the Aeron which offers different height adjustment ranges, seat widths, etc. You might also be a borderline so consider this example, I’m on the shorter side and with the Embody at its lowest position, I am just barely at the correct knee position. It works for me, but I have no margin. However, if I have chosen the Aeron size A, I would have additional space to lower the seat, but would also have to consider the narrower seat body. To sum it up. The Herman Miller Embody was well worth the price paid. The seat is very comfortable, breathes well, offers great support and is built to last. I would recommend this chair to anyone who is looking for a premium quality ergo chair, but as you can see, there are others that are just as good and may even fit your better. I hope I have been able to give you a good comparison that can show you the difference between a few of them so you can determine what is most important to you. However, no review can ever replace in seat (no pun intended) experience. If at all possible, find place where you can actually try them out. This is my 100%, guaranteed, best recommendation!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2022

recommand products