SKU: 520789044
adama essentials herbicide

adama essentials herbicide Adama Flagship 20L. Fluroxypyr

Sale price$21.11 Regular price$23.45
Save 10%

Pay in installments of $5.86 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Nov 15 - Nov 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

adama essentials herbicide Adama Flagship 20L. FluroxypyrGroup 4 Herbicide Adama Flagship 20L is a high performance selective herbicide designed for effective broadleaf weed control in various cropping and pasture systems. With fluroxypyr 400 g L, it delivers targeted action against stubborn weeds, including volunteer legumes, thistles, and climbing weeds, while being safe for established pasture and cereal crops when used as directed. Flagship is a translocated post emergence herbicide controlling

Group 4 Herbicide

Adama Flagship 20L is a high-performance selective herbicide designed for effective broadleaf weed control in various cropping and pasture systems. With fluroxypyr 400 g/L, it delivers targeted action against stubborn weeds, including volunteer legumes, thistles, and climbing weeds, while being safe for established pasture and cereal crops when used as directed. Flagship is a translocated post-emergence herbicide controlling important broadleaf weeds in cereals, fallow, pastures, sorghum and non-crop situations.

 

Key Features:

  • Broad-Spectrum Control – Targets key broadleaf weeds in cereals, pasture, fallow, and non-crop areas

  • Flexible Application – Can be applied alone or in tank mixes for enhanced weed management

  • Fast & Effective – Rapid uptake ensures quick knockdown and long-lasting control

  • Proven Performance – Trusted by agronomists for reliable, cost-effective weed control

 

Maximising Performance:

  • Apply during active growth – Treat weeds when actively growing; avoid stressed plants.

  • Ensure full coverage – Use adequate spray volume to cover foliage and stems.

  • Follow correct mixing – Add to water first, agitate, and use an adjuvant.

  • Use proper equipment:

    • Boom Spray – 200-300 kPa pressure, flat fan nozzles.

    • Aerial – Minimum 35 L/ha water, 250-350 micron droplets.

    • Hand Gun/Knapsack – 1500-4000 L/ha, full plant coverage.

    • Basal Bark – Spray stems up to 30 cm high with diesel mix.

    • Cut Stump – Apply immediately after cutting.

  • Apply in good weather – Avoid strong winds, extreme heat, or rain within 1 hour.

  • Tank mix correctly – Compatible with 2,4-D, MCPA,; avoid alkaline mixes.

  • Prevent resistance – Rotate herbicides and use integrated weed management.

  • Follow withholding periods – No grazing for 7 days; avoid treated poisonous weeds.

  • Clean sprayers properly – Rinse with alkali detergent after use.

 

Weeds Controlled:

  • Bathurst Burr (Xanthium spinosum)

  • Noogoora Burr (Xanthium strumarium)

  • Blackberry Nightshade (Solanum nigrum)

  • Black Bindweed (Climbing Buckwheat) (Fallopia convolvulus)

  • Boggabri Weed (Amaranthus macrocarpus)

  • Cobbler’s Pegs (Bidens pilosa)

  • Common Sida (Sida rhombifolia)

  • Deadnettle (Lamium amplexicaule)

  • Fleabane (Conyza spp.)

  • Hexham Scent (Melilotus) (Melilotus indicus)

  • Indian Hedge Mustard (Sisymbrium orientale)

  • Lesser Swinecress (Coronopus didymus)

  • Mexican Poppy (Argemone mexicana)

  • Prickly Lettuce (Lactuca serriola)

  • Redroot Amaranth (Amaranthus retroflexus)

  • Rough Poppy (Papaver hybridum)

  • Skeleton Weed (Suppression only) (Chondrilla juncea)

  • Silverleaf Nightshade (Solanum elaeagnifolium)

  • St John’s Wort (Hypericum perforatum)

  • Spiny Emex (Doublegee, Threecorner Jack) (Emex australis)

  • Starburr (Acanthospermum hispidum)

  • Variegated Thistle (Silybum marianum)

  • Wild Radish (Raphanus raphanistrum)

  • Wild Turnip (Brassica tournefortii)

  • Blackberry (Rubus spp.)

  • Brigalow (Acacia harpophylla)

  • Broad-Leaved Pepper Tree (Schinus terebinthifolius)

  • Camphor Laurel (Cinnamomum camphora)

  • Chinese Apple (Chinee Apple) (Ziziphus mauritiana)

  • Eucalyptus spp. (including Eucalyptus camaldulensis - River Red Gum)

  • Gorse (Ulex europaeus)

  • Green Cestrum (Cestrum parqui)

  • Lantana (Lantana camara)

  • Mother-of-Millions (Bryophyllum delagoense)

  • Parkinsonia (Parkinsonia aculeata)

  • Prickly Acacia (Vachellia nilotica subsp. indica)

  • Privet (Ligustrum spp.)

  • Sicklepod (Senna obtusifolia)

  • Tropical Soda Apple (Solanum viarum)

  • Wild Tobacco Tree (Solanum mauritianum)

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 520789044

Discover Niche Categories That Outsell adama essentials herbicide

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
karine
Dallas, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Chelsea, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Port Orchard, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
B
Verified Purchase
Barbara McCloud
Grantham, US
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
A
Verified Purchase
Al Tompkins
Grantham, US
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc. They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places. But they wqould work especially well if you were not constantly moving them as we do. They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026

recommand products