Pay in installments of $5.06 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Nov 16 - Nov 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
landscape and garden micro spray watering kit Drip & Micro Sprinkler Kit – Greenhouse MegastoreThe Drip & Micro Sprinkler Kit is one of the bestselling kits around, suitable for residential gardens planted with roses, shrubs, groundcovers, flowerbeds and trees. The kit can cover up to 700 sq. ft and can be expanded to cover more than 1000 sq. ft using additional drip tubing, micro sprayers and drip emitters. This kit contains all the parts needed to start a system from a faucet or a garden hose. The kit includes a 3 4" backflow preventer, 3 4"
The Drip & Micro Sprinkler Kit is one of the bestselling kits around, suitable for residential gardens planted with roses, shrubs, groundcovers, flowerbeds and trees. The kit can cover up to 700 sq. ft and can be expanded to cover more than 1000 sq. ft using additional drip tubing, micro sprayers and drip emitters. This kit contains all the parts needed to start a system from a faucet or a garden hose.
The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 200' of premium 1/2" drip tubing with .600 ID x .700 OD, 50' of 1/4" micro tubing, 11 micro sprayer assemblies with 13" stakes and micro tubing with barbs, 20 1-GPH PC drip emitters and all the necessary parts needed to complete the installation.
Features:
- Use to water roses, shrubs, groundcovers, flowerbeds and trees; ideal for hillsides
- Complete kit; covers up to 700 sq ft (can be easily expanded)
- Contains 11 micro sprayer assemblies, including three 360°, four 180° and four 90° patterns, and 20 1-GPH PC button drip emitters
- Applies water at a very low application rate reducing surface evaporation from leaves and soil
- Micro sprayers are useful as water remains in the upper soil layers where the roots are developing
- Easy to install
- Provides flexibility in irrigation frequency and low application rate minimizes soil compaction and surface runoff
- Designed for new and existing landscapes, including difficult terrain such as slopes and oddly shaped areas
- No special tools or glue are needed
- Save money by significantly lowering the cost of system components compared to conventional irrigation systems
- DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check with local water provider)
Product Specifications:
- Maximum incoming pressure: 100 PSI
- Operating pressure: 25 to 30 PSI (25 PSI preset pressure regulator included)
- Maximum recommended flow rate: 220 GPH (3.7 GPM)
- Poly tubing length & size: 200' x 1/2" with .600 ID x .700 OD
- Micro tubing Length and size: 50' x 1/4"
- 3/4" FHT x MHT pressure regulator: downstream pressure preset to 25 PSI
- PC drip emitter flow rate: 1 gallon per hour (GPH)
- Micro sprayer flow rate: 14 gallons per hour (GPH)
- Total flow rate for this kit: 174 GPH (2.9 GPM)
Kit Includes:
- (1) 3/4" FHT x MHT backflow preventer
- (1) 3/4" FHT x MHT pressure regulator
- (1) Swivel adapter with screen
- (1) 200' of 1/2" drip tubing
- (1) 50' of 1/4" micro tubing
- (3) 360° spray jets on threaded barb
- (4) 180° spray jets on threaded barb
- (4) 90° spray jets on threaded barb
- (20) 1 gallon per hour (GPH) PC drip emitters
- (11) 13" clip spike assemblies with 24" micro tubing and barbs
- (20) 1/4" tubing holder stakes
- (10) 1/4" barbed tees
- (12) 1/4" barb connectors
- (10) 1/2" tubing holder stakes
- (4) 1/2" tees
- (1) 1/2" coupling
- (4) 1/2" elbows
- (1) Hole punch
- (10) Goof plugs
- (4) Figure "8" hose ends
- (1) Instruction manual
How to Use
The Deluxe Drip and Micro Sprinkler Kit can be used in a wide range of layouts to accommodate most garden watering requirements. The kit uses micro sprayers with 360°, 180° and 90° spray patterns and PC drip emitters to provide a full flexibility within the installation. The micro sprayers have no moving parts and distribute the water in a very similar manner to conventional spray heads but with very low flow and with very low application rate. The PC drip emitters in the kit can be used to cover additional individual plants within the layout. This kit contains all the parts required to install a complete system for up to 700 SF. It can be connected into a 3/4" faucet/spigot or a garden hose. If a faucet is not adjacent to the garden or to the location of your drip and micro sprayers irrigation installation, you may extend from the faucet using a garden hose or use additional length of ½ drip tubing (model B35 for 50or B36 for 100). To start the installation, the backflow device can be mounted directly to the faucet or to the end of a garden hose. Please make sure to add the 25 PSI pressure regulator (included) after the backflow preventer. The pressure regulator is used to lower the incoming pressure from the faucet to the recommended operating pressure of 25 PSI, which is within the range of operating pressures for drip irrigation or micro-sprinkler systems.
- The basic installation recommendation for this type of kit is first to review the area and then to make a drawing of the garden or site with your preferred layout.
- In the installation stage, to the faucet, first connect the backflow device, then the pressure regulator and then 3/4" swivel adapter with screen. If water quality is a concern, we highly recommend using a fine mesh 3/4" filter with 155 mesh (model D57A), not included with this kit.
- Lay the drip tubing per your drawing and secure the drip tubing to the ground using the stakes provided.
- Add fittings such as elbows and tees per your drawing layout, leaving the end of the drip tubing open.
- Turn the faucet on to flush the line. Then shut off the faucet and close the end of the drip tubing using the hose end included with the kit
- Install the micro sprayers per the recommended spacing suggested in the instruction manual.
- The drip emitters are installed using one of two methods, either directly into the drip tubing or at the end of the micro tubing with the drip emitters placed under the plant canopy, at the center between the plant trunk and the plant canopy edge. One of the most common installation errors is using too few, and poorly spaced, emitters. Often only a single emitter is placed at the base of a newly planted tree or shrub. In clay soils, a single drip emitter can wet three to four feet in diameter; on sandy soils, however, the same layout using the same drip emitter will only wet an area less than one foot in diameter. Because plant roots can grow a few feet a year depending on the plant and locations, after one year the diameter of the root system might exceed the diameter of the watered area. A single emitter per tree or shrub could therefore restrict root development as early as the first year after planting. For this reason, it is especially important to place additional drip emitters around each plant, early in the plant's life. See soil type section for drip emitter placement.
Note: To expand the kit we highly recommend continuing with the same model micro sprayer and drip emitter components.
Review the instruction manual included with the kit for complete details.
About the soil and suggested drip emitters spacing:
- Sandy soil or light textured soil: Water percolates straight through before it can spread far enough horizontally, so use the drip emitters in close spacing of 10" to 12" apart. Apply water at close intervals such as every other day for 20 to 90 minutes depending on plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
- Loamy soil or medium textured soil: This is the ideal soil condition with water moving slowly and spreading evenly, so use the drip emitters spaced 16" to 18" apart. Apply water at wider intervals such as every two to four days for 15 to 90 minutes depending on plant size, type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
- Clay soil or heavy textured soil: Water is absorbed very slowly, so install the drip emitters at a spacing of 18" to 24" apart. Apply water at longer intervals such as every three to five days for 30 minutes to 60 minutes depending on flow rate, plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 4
Works as advertised with minor aiming quirk
Style: 1 to 1 IR Repeater
Setup was quick and straightforward. I plugged it in, placed the receiver, and it started relaying signals right away. It does exactly what it is supposed to do and successfully extends remote control range to my equipment without any complicated configuration.
The only issue I have noticed is that it can be a little directional. I sometimes have to angle my remote slightly from the left or right instead of pointing straight at the receiver for it to register consistently. It is not a dealbreaker, just something to keep in mind when deciding where to place it.
Overall, it performs its intended function well and is a solid option if you need an IR repeater, especially considering the price and simple setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2026
★★★★★ 5
It works!
Style: 1 to 1 IR Repeater
I’ve been wanting to use my DVD player more often, when I work at my desk, but it’s situated too far for the remote. This device works perfectly, now I can enjoy so many old DVDs without having to move or rearrange my whole setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 5
Chelsea Market Manhattan.
Style: 1 to 10 IR Repeater, Style: 1 to 10 IR Repeater
When used correctly under the correct conditions these work wonderfully.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
★★★★★ 5
Magical TV Backlight With Amazingly Accurate and Vivid Colors
Size: 7.8FT for 40''-50'' TV, Size: 7.8FT for 40''-50'' TV
I had very high expectations for this Govee 3 Lite backlight and it surpassed all of them by a mile. This Govee 3 Lite with proper set up, calibration and correct settings looks absolutely magnificent with beautiful and accurate colors that it adds so much to my TV viewing experience.
Most of the "bad" reviews on here is USER ERROR because the person can't bother to do even the most basic research therefore he/she doesn't know how to set it up, calibrate and adjust settings correctly.
So here are some tips and settings that may help others:
For accurate colors it's vital to set your white light accurately first since all other colors blend off of white.
Also, ALL of your TV SETTINGS like BRIGHTNESS, COLOR TEMPERATURE, PICTURE MODE, COLOR, CONTRAST, etc. has an impact on the LED strip brightness, vividness, accuracy and density as well. So play around and pause a scene on your TV that's really colorful and then turn your individual TV settings all the way up and all the way down to see how it affects your Govee lights.
Now I have an LG OLED and OLED's have perfect black levels and near perfect colors out of the box, so you may not get the exact results I did. But it doesn't hurt to give it a try and see if it helps your Govee set up if you are not satisfied with your colors.
1. Put the camera dead center of your TV and at 90 degrees (or as close as you can).
2. Install the light strip as close as you possibly can to the edge of your TV. I've seen youtube videos where people install them 2" to 3" inward from the edge (I get it if you have no choice because your back panel has a weird shape or is not completely flat along the edges) and that gives such a tiny light spread on the wall and also leads to dead spots in the corners because the light is set too far away and that causes the TV's corners to cast a shadow on the wall leaving a dead spot.
3. When you calibrate with the orange squares make sure the gray box ends up looking either like a rectangle or a bow tie. I added pictures of my actual calibrations of both shapes to my review to give you an idea of what I'm talking about. If your TV is wall mounted or on a TV stand where there's nothing underneath the camera that may interfere with it, I'd probably go with a rectangle shape which is the ideal shape according to Govee. But after playing around with the calibration I discovered that for my set up a bow tie shape gives me the most accurate and uniform colors because I have a semi-glossy TV stand and it helps to prevent the camera from seeing past the bottom edge of my TV and catching whatever colors that are reflecting back up off my TV stand so it doesn't interfere with the actual colors coming from my screen.
4. When you adjust the "color calibration, saturation, white balance, etc." in the app do it in a dark room.
4a. "Saturation" setting needs to be dropped way down to give you accurate colors. I keep mine between 1%-5%. If you're one of many people that's having problems with your white light looking green, dropping the saturation down a lot should fix that problem and give you a nice white light that will go a long way in giving you accurate colors across the board.
5. "White balance" default is 50% but it looks a little too blue on my LG OLED so I keep my white balance a little more on the red side at 70%-75% and I get a nice slightly warmer white that works wonders in getting accurate colors all around. Google "pure white" background and use that to adjust your white balance and saturation.
6. "Relative Brightness" default is 50%. I set mine all the way up to 100% on all four sides and then I control the brightness level with the main brightness slider which when it's a bright room I set it to 100% and when it's a dark room I set it to 47% because that's the percentage I found that when the screen or parts of the screen goes dark so do the corresponding lights which only adds to the immersive viewing experience.
7. If you want your lights to show all the different colors as you watch TV you need to choose "part" in the app. If you choose "whole" you will get only solid colors on all four sides.
8. You can choose either "movie" or "game" but personally I leave mine to "movie" 90% of the time even if I'm gaming. The difference between them is with "game" the colors switch a little faster but that leads to a lot more flickering which can be very distracting. With "movie" it's a softer and smoother transition.
9. I love that I can connect my Govee kit to my Alexa app by adding it in the "skills" section which allows me to control the backlight with voice commands for things like turning the LED strip on and off or the brightness up or down or setting a timer/routine to turn the LED strip on or off at a certain time of day I set.
Thankfully I had a few weeks to do a lot of research and also check out youtube videos before Prime Day when I was able to purchase this kit for $46 for the 40"-50" size.
And it was in doing this research that made my set up super easy with no problems at all when my kit arrived. All told it took me about two hours from start to finish to install and set up my backlight settings to get it perfect for my LG OLED TV.
It took me longer than most people since I went all OCD when figuring out the exact placement, spacing, height and measurements of the lights to get the best possible light spread on my wall and it was all worth it since my LED's look fantastic because I have a full and wide light spread and the colors are so evenly dense with no dead spots in the corners like I've seen on so many other set ups.
I was worried that the whole calibration thing would be a PITA since a lot of reviewers seem to struggle mightily with getting it right. For me, it was super simple because through my research I learned what not to do and avoided all the pitfalls that plague others.
The proof is in the pudding. I've added screenshots of the settings I use and a sample video with those settings and my lights are mesmerizing and gorgeous. Check it out!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 10, 2025
★★★★★ 5
Probably the best available for the money
Size: 11.8FT for 55''-65'' TV, Size: 11.8FT for 55''-65'' TV
I love these lights. High-quality dynamic backlighting for your TV. With the calibration and settings dialed correctly, it moves and breathes smoothly with the picture as you use the screen. With this installed it really amps up the cozy and artsy vibes of the screen, adding further immersion. It's also easier on your eyes in a dark room to add backlighting.
You can set the brightness level to the level you want, and you can fully control the colors and tone, whether you want to set it to something static, add a colored border, or use the dynamic lighting (which is what I'm currently using). These lights were made for 55 inch to 65 inch TVs. There are four strips rolled up, two for the short side and two for the long side. No matter which corner you start from, you will be able to set it up properly during calibration. The strips stuck well so far but were not so firm that I couldn't pull up one strip to reapply it.
The TV I have here in the pictures is the Sony Bravia ii OLED 4K panel (~$2000 screen, excellent picture quality for the price point). I am using a Rocketfish omnidirectional wall mount behind it.
TIPS
I followed some other reviews here for the calibration. It was recommended to set the TV brightness to max for calibration, then adjust both TV and backlight brightness after setup.
The physical setup only required me to have a TV pulled forward from the wall a foot or so, plus a 3-step ladder so I could easily reach the top of the TV. You could absolutely install this on a TV sitting a bit forward on a stand as well.
App setup was a breeze once the lights and camera were attached properly. I will sort out my cable management eventually, once I have a TV shelf installed below my panel which is my next goal for this room.
The kit comes with some additional adhesive to secure the lights that I didn't end up using, as the adhesive on the back of the light strips was sufficient for now. I'm saving the extra parts just in case.
Overall I highly recommend it! The dynamic lighting adds so much immersion without being loud or flashy unless you want it to be. Kinda just blends into the background and subtly amps up the quality of your whole experience. Like the color on the picture just blends seamlessly into the wall and the room.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 19, 2025