SKU: 86773177887
burle marx prayer plant

burle marx prayer plant Calathea Burle Marxii 'Fishbone Prayer' – KOKECUTES

Sale price$26.68 Regular price$29.64
Save 10%

Pay in installments of $7.41 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Nov 15 - Nov 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

burle marx prayer plant Calathea Burle Marxii 'Fishbone Prayer' – KOKECUTESThe Calathea Burle Marx 'Fishbone Prayer' is an exquisite addition to any space. Its vibrant pattern of layered deep green and light green foliage delicately lends itself to the atmosphere of any room, bringing a sense of well crafted sophistication to the air. Perfect for those with an eye for the refined. Kokedama It is a technique that consists of replacing the container or pot with a ball covered with moss or coconut fiber, which will help the

The Calathea Burle Marx 'Fishbone Prayer' is an exquisite addition to any space. Its vibrant pattern of layered deep green and light green foliage delicately lends itself to the atmosphere of any room, bringing a sense of well-crafted sophistication to the air. Perfect for those with an eye for the refined.

Kokedama 
It is a  technique that consists of replacing the container or pot with a ball covered with moss or coconut fiber, which will help the substrate to maintain humidity and temperature.


Kokedama Care:

LIGHT
Medium to bright indirect light. can handle low light, place in a location with little filtered sunlight. Avoid direct exposure

WATER
It is watered by immersion, you just have to immerse the ball in a container full of water for 5 to 15 minutes or until it is completely saturated with water.
Take the kokedama out of the water, let the excess water drain before putting it back in its place, you must place it on a plate or a base.
To determine when to water, feel the weight of the plant. If the ball feels heavy, no water is needed. If it feels light, soak the ball as directed.
Approximately every 10 - 14  days.
The frequency of irrigation will vary depending on the location, in any case this is only an orientation, the frequency of irrigation also depends on the temperature and humidity, among other factors. So, adjust your watering based on the conditions your plant lives in.
And remember, it is almost always better to "sin" to water less than more.


FERTILIZER:
Strengthen with fertilizers and organic fertilizers, preferably adding them to irrigation water.

MAINTENANCE:
Cut the dried leaves carefully so as not to damage the healthy leaves. Avoid drafts and heating.


For units that are available, shipping will take place in 2 to 4 business days. In the event that you want to reserve, I will inform you of the new term.
The kokedama in the photo is not the exact plant you will receive, please note that it is a reference photo.
When you buy your kokedama online, give it time to adjust to its new surroundings. It is very common for them to lose a few leaves when they first arrive at their new home, but they will be complete with beautiful shiny new leaves in one or two.
months.
Note: this indoor plant is not intended for human or animal consumption

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 86773177887

Discover Niche Categories That Outsell burle marx prayer plant

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Michael A. Adkins
Fort Morgan, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Lexington, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Belleville, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Battle Creek, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
D
Verified Purchase
Daniel G Forster
San Leandro, US
★★★★★ 3
It’s about support more than anything else !
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer worked great until it didn’t. Cleared a paper jam that kept giving an issue. Then it gave a scanner error, after paper jam was resolved. I called support; they gathered all my info. Transferred me to someone else who then told me she’d email me some numbers to call for deals on refurbished printers or onsite support. I ended ups solving the problem… I threw the printer in the trash, and will likely not buy anymore epson products. I was willing to pay for service but not waste more time and making more phone calls. I had a credit card; i was willing to use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 12, 2026

recommand products