SKU: 90348409313
spiky succulent with red flowers

spiky succulent with red flowers Shop 'Red Dragon Flower - Huernia schneideriana' Care & Info

Sale price$23.68 Regular price$26.31
Save 10%

Pay in installments of $6.58 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Nov 1 - Nov 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

spiky succulent with red flowers Shop 'Red Dragon Flower - Huernia schneideriana' Care & InfoThe Red Dragon Flower, botanically known as Huernia schneideriana, is a fascinating and increasingly popular flowering succulent admired for its unusual dragon like blooms and sculptural stems. The stems usually grow upright when young but gradually begin to spread, trail, or droop as the plant matures, making it especially attractive in hanging baskets, shallow pots, and decorative containers. Despite its cactus like appearance, the Red Dragon Flower

The Red Dragon Flower, botanically known as Huernia schneideriana, is a fascinating and increasingly popular flowering succulent admired for its unusual dragon-like blooms and sculptural stems. The stems usually grow upright when young but gradually begin to spread, trail, or droop as the plant matures, making it especially attractive in hanging baskets, shallow pots, and decorative containers.

Despite its cactus-like appearance, the Red Dragon Flower is not a true cactus. It is a soft-stemmed succulent with fleshy, water-storing stems that help it thrive in dry conditions. Its common name, “Dragon Flower,” comes from its dramatic, deep red, star-shaped flowers, whose textured petals and bold colors resemble the scales or open mouth of a mythical dragon.

Like many desert-adapted succulents, Huernia schneideriana has evolved to thrive in hot, arid, rocky environments.

Its thick green stems typically grow 12 inches tall and feature soft, tooth-like ridges that resemble tiny thorns, giving the plant its distinctive cactus-like look without the sharp spines.

The true highlight of this plant is its extraordinary flowers. The blooms are relatively small, usually 1 to 2 inches wide, but incredibly eye-catching and unforgettable.

Each flower displays a deep purple-black center surrounded by a velvety reddish-black interior and brownish-red exterior, creating a dramatic, almost otherworldly effect.

Its natural drought tolerance and resilient growth habit make it an excellent choice for both beginners and experienced growers seeking a hardy, low-maintenance succulent.

Unlike many other members of the Huernia genus and carrion flower relatives, whose blooms can produce a strong, unpleasant odor, Huernia schneideriana has a much milder scent, making it far more suitable and enjoyable as an indoor houseplant.

When and How to Water Your Red Dragon Flower

The Red Dragon plant prefers light and infrequent watering, much like the dry conditions of its native Eastern African habitat. This succulent grows best when watered using the “soak and dry” method, where the soil is watered thoroughly and then allowed to dry out completely before the next watering.

Water your Red Dragon Flower about every 2 to 3 weeks during the active growing season, then reduce watering once a month in dormant season.

In the spring and summer, you may need to water your red dragon flower more frequently as it actively grows. Always use a pot with drainage holes and allow the soil to fully dry between waterings to keep the plant healthy.

In the fall and winter, you should reduce the frequency of watering to prevent overwatering and potential root issues. Wrinkled or slightly soft stems are common signs that it may need watering.

Remember, it's always better to underwater than to overwater Huernia succulents like the red dragon flower. This will help ensure the health and longevity of your Huernia schneideriana.

Light Requirements - Where to Place Your Red Dragon Succulent

When growing indoors, place the red dragon flower on a sunny windowsill or near a south facing window where it can receive around 4 to 6 hours of sunlight daily.

If the stems start turning yellow or brown, it may be getting too much direct sun.

Move it slightly away from the window or provide light shade during the hottest part of the day. 

When growing outdoors, it thrives in bright sunlight or partial shade and grows best with around 4 to 6 hours of direct morning sunlight daily.

Since intense afternoon sun can be too harsh for its delicate stems, place it in a location with bright, filtered light during the hottest part of the day.

If your Red Dragon Flower is not receiving enough light, it may become leggy and pale in color. In areas with limited natural sunlight, you can use a grow light to provide the extra light needed for healthy and compact growth.

Optimal Soil & Fertilizer Needs 

The red dragon flowers favor very airy, sandy soil that drains well. Planting them in ordinary soil will result in compacted roots, stunted growth, and most likely root rot. Ideally, you can use our specialized succulent potting mix that contains 5 natural substrates with organic mycorrhizae to support healthy root development and stronger growth.

When it comes to fertilizing your red dragon flower, it's best to do so sparingly. You can use a diluted, low nitrogen fertilizer or a balanced succulent fertilizer with an NPK ratio such as 5-10-5. Avoid over fertilizing, as too much fertilizer can damage the roots and lead to weak or leggy growth.

Hardiness Zone & More 

In the United States, the red dragon flower is mostly an indoor plant, but if you live in southern Florida or Hawaii, then you can cultivate it outdoors in USDA zones 9 to 11.

It prefers warm temperatures between 65°F and 80°F and thrives in warm, dry conditions, but should be protected from temperatures below 50°F.

As for humidity, it is well-adapted to dry and arid environments. It can tolerate low humidity levels, making it a great choice for drier climates or indoor environments with lower humidity. 

How to Grow as an Indoor Houseplant 

The Red Dragon Flower can adapt very well as an indoor houseplant when given enough light and warmth. Place it near a bright window where it can receive several hours of sunlight daily, preferably gentle morning sun combined with bright indirect light. East or south facing windows are usually the best spots. 

Keep the plant in a warm area with temperatures between 65°F and 80°F, and protect it from cold drafts or temperatures below 50°F. It prefers low humidity and dry conditions, making it well suited for typical indoor environments. 

Wildlife – Red Dragon Flowers Attract the Following Friendly Pollinators 

The Red Dragon Flower can attract pollinators such as bees, butterflies, moths, hummingbirds, flies and small gnats. These insects help pollinate the blooms in nature. The flowers may also attract tiny beetles and other beneficial insects that are curious about the plant’s unique appearance. 

Butterflies
Bees
Hummingbirds
Lady Bugs
Multi Pollinators
Other Birds

According to ASPCA,  Huernia schneideriana is considered mildly toxic to pets and humans. It is best to keep the plant out of reach of curious pets and small children. Wearing gloves while pruning or propagating can also help prevent skin irritation. 

How to Propagate Your Red Dragon Flower 

You can propagate your plant through stem cuttings. The best time to propagate is during spring or summer when the plant is actively growing.

Use a clean, sharp knife or scissors to cut a healthy stem from the parent plant. Let the cutting dry and callous for 1 to 2 days before planting to help prevent rot. Place the cutting in a warm spot with bright indirect light while it develops roots. Within a few weeks, new roots and growth should begin to appear.

Key Takeaways

  1. The Red Dragon Flower is a unique succulent prized for its exotic, velvety blooms that instantly stand out in any plant collection.
  2. It is a low maintenance plant that thrives with minimal watering, making it perfect for busy plant owners and beginners.
  3. Its compact, trailing stems make it a beautiful choice for decorative pots, shelves, and hanging baskets.
  4. The plant grows well indoors with bright light and can reward you with eye catching blooms during the warmer months.
  5. It can thrive both indoors and outdoors making it a versatile succulent for many growing spaces.

Final Thoughts

Overall, the Red Dragon Flower (Huernia schneideriana) is truly a captivating and unique succulent. With its vibrant red color, dragon-like flower shape, and fascinating history, it's no wonder why it's a favorite among succulent enthusiasts. Whether you choose to grow it indoors or outdoors, providing it with the right conditions, such as well-draining soil, bright indirect sunlight, and temperatures within its preferred range, will help it thrive. With its low maintenance needs and stunning appearance, the red dragon flower is sure to add a touch of beauty and intrigue to any succulent collection!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90348409313

Discover Niche Categories That Outsell spiky succulent with red flowers

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Robert O. Forsyth Jr.
Chelsea, US
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk! Built cheaply. Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper. If you have a piece of paper that has a fold in it, forget about it. That will never feed through. I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides. It took 23 minutes to get done. Should not have taken 2. The last time I used it same issues but less sheets. The paper is SO TIGHT in the feed section it is hitting BOTH walls. You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly. While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!) Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds. Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going). Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit! So much for a 5 year Warranty. Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022. Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm . As they pass you along the ranks you have to repeat EVERYTHING all over again. As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out. Just PLOP! Other issues while I am at it, the Picture quality is "OK" nothing special. I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff. The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's). Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it. I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC. I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.) The panel function is anything but user friendly. Firmware Updates, if not done, will prevent usage until done. You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined. Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded. The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges. The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP? But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low. They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon. You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
M
Verified Purchase
Michael A. Adkins
Natrona Heights, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Lake Worth, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Omaha, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Bozeman, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026

recommand products